Product ID:563 RUSTMASTER HIGH-GLOSS OIL ENAMEL
MSDS Date:03/01/1990
FSC:8010
NIIN:00F025424
MSDS Number: BPRXM

GLIDDEN COMPANY

925 EUCLID AVENUE
CLEVELAND, OH 44115
US

Emergency Phone: 216 344-8000 OR 800-545-2643

Info Phone: 800-221-4100

Cage: 01PD6

GLIDDEN PAINT, ICI PAINTS NORTH AMERICA

CLEVELAND, OH 44115 US

Telephone: 800-545-2643/216-344-8207

Cage: 01PD6

AROMATIC PETROLEUM DISTILLATE, HEAVY STRAIGHT RUN NAPHTHA

CAS: 64741-41-9

Fraction By Weight: 50-60%

OSHA PEL 500 PPM

ACGIH TLV: 500 PPM

1), CALCIUM CARBONATE,

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 5-10%

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM

CLAY (KAOLIN)

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 5-10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293

COLUMBIA CARBON, CARBON BLACK, LAMPBLACK (SUSPECTED HUMAN

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 1-5%

OSHA PEL 3.5 MG/CUM

ACGIH TLV: 3.5 MG/CUM

GRAPHITE

CAS: 7782-42-5

RTECS: MD9659600

Fraction By Weight: 10-20%

OSHA PEL 15 MPPCF RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9293

SILICA, MICA, MUSCOVITE

CAS: 12001-26-2

RTECS: VV8760000

Fraction By Weight: 5-10%

OSHA PEL 20 MPPCF

ACGIH TLV: 3 MG/M3 RDUST; 9293

SILICONE ALKYD

Fraction By Weight: 10-20%

8.7

RTECS: 9999999WG

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION OF RESPIRATORY
TRACT. SKIN/EYES: IRRITATION. INGESTION: LUNG INFLAMMATION & DAMAGE
DUE TO ASPIRATION OF MATERIAL INTO LUNGS.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:INHALATION: MUCOUS MEMBRANE
IRRITATION/FATIGUE/DIZZY/HEADACHE/UNCOORDINATION/NAUSEA/VOMITING/CN
S DEPRESSION/ANESTHESIA/PERMANENT BRAIN, NERVOUS SYSTEM, LIVER &
KIDNEY DAMAGE/ABNORMAL BLOOD/UNCONSCIOUS /RESPIRATORY
FAILURE/ASPHYXIA/DEATH/PNEUMOCONIOSIS. SKIN: DERMATITIS/DEFAT. EYE:
BLURRY VISION/TEAR/RED/CORNEAL INJURY.
Medical Cond Aggravated by Exposure:EYE, SKIN, RESPIRATORY, & LUNG
DISORDERS, ASTHMA-LIKE CONDITIONS

First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE & SUPPORT CONTINUED
BREATHING. HAVE TRAINED PERSON GIVE OXYGEN IF NECESSARY. SKIN: WASH
OFF QUICKLY W/PLENTY OF WATER, THEN SOAP & WATER. EYES: FLUSH
IMMEDIATE LY W/LARGE AMOUNTS OF WATER. INGESTION:OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Flash Point:106F
Lower Limits:1%
Extinguishing Media:DRY CHEMICAL OR FOAM
Fire Fighting Procedures:WATER MAY BE USED TO COOL & PROTECT EXPOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT/FIRE. VAPORS CAN FORM EXPLOSIVE MIXTURES IN
AIR AT ELEVATED TEMPERATURES. COMBUSTIBLE LIQUID.

Spill Release Procedures:COMPLY W/ALL APPLICABLE HEALTH & ENVIRONMENTAL
REGULATIONS. ELIMINATE ALL SOURCES OF IGNITION. VENTILATE AREA.
SPILLS MAY BE COLLECTED W/NONCOMBUSTIBLE ABSORBENT MATERIALS.

Handling and Storage Precautions:STORE <100F. KEEP CONTAINERS TIGHTLY
CLOSED/UPRIGHT WHEN NOT IN USE/IN ADEQUATE VENTILATION AWAY FROM
HEAT/SPARKS/OPEN FLAMES/CHILDREN. DON'T INGEST.
Other Precautions:AVOID SKIN & EYE CONTACT/VAPOR INHALATION/CONDITIONS
WHICH RESULT IN INHALABLE PARTICLE FORMATION SUCH AS
SPRAYING/ABRADING (SANDING) PAINTED SURFACES. INTENTIONAL MISUSE BY
DELIBERATELY CONCENTRATING /INHALING CONTENTS MAY BE HARMFUL/FATAL.

Respiratory Protection:CONTROL ENVIRONMENTAL CONCENTRATIONS BELOW
APPLICABLE STANDARDS. USE NIOSH/MSHA APPROVED RESPIRATORY
PROTECTION DURING SPRAYING OR ABRADING (SANDING) OF PAINTED
SURFACES.
Ventilation:PROVIDE DILUTION VENTILATION OR LOCAL EXHAUST TO PREVENT
BUILD-UP OF VAPORS.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:EYE WASH, SAFETY SHOWER
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH HANDS THOROUGHLY AFTER HANDLING, BEFORE EATING OR
SMOKING.
Supplemental Safety and Health
PRECAUTIONS (CONT'D): EMPTY CONTAINERS MAY CONTAIN HAZARDOUS RESIDUES.
GROUND EQUIPMENT WHEN TRANSFERRING TO PREVENT ACCUMULATION OF
STATIC CHARGE.

Boiling Pt:B.P. Text:325-385F
Percent Volatiles by Volume:68.5%

Stability Indicator/Materials to Avoid:YES
OXIDIZERS, ACIDS, BASES, AMINES
Stability Condition to Avoid:ELEVATED TEMPERATURES, FIRE, SPARKS, OPEN
FLAMES, & OTHER IGNITION SOURCES
Hazardous Decomposition Products:CO, CO2, IRRITATING & TOXIC GASES

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/ALL APPLICABLE
REGULATIONS. AVOID DISCHARGE TO NATURAL WATERS. COMBUSTIBLE LIQUID.
UN 1263.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.